E3D V6 CFD Optimized Adjustable Part Cooling Duct 3D Printer Model
The file 'E3D V6 CFD Optimized Adjustable Part Cooling Duct 3D Printer Model' is (stl,iges,step) file type, size is 3.3MB.
The file 'E3D V6 CFD Optimized Adjustable Part Cooling Duct 3D Printer Model' is (stl,iges,step) file type, size is 3.3MB.
Update Oct 29, 2019: Added STEP and IGES source files.
Adjustable part cooling duct for E3D v6 with 5015 fan blower.
I'd love to see your make - please publish :)
Consider a tip if you like my work :)
The air flow has been CFD optimized ensuring equal air distribution into three areas: before, below and behind the nozzle.
The part cooling duct should be positioned 1-2 mm higher than nozzle end. The height can be adjusted in 1mm steps.
The clip is derived form on my other design: https://www.thingiverse.com/thing:3590309
Printing:
Clip - for the best strength print clip in original horizontal orientation - requires support.
Nozzle duct - print flat, no supports
Link - print flat, no supports
Material: PET-G or ABS
Layer height: 0.2 mm
Parts:
1 x 5015 fan blower
2 x M3 20 mm bolt
2 x M3 7-10 mm bolt
1 x M3 30 mm bolt or 2x zip ties
5 x M3 nut
Assemble:
Check out my other designs:
https://www.thingiverse.com/DaVinci2000/designs
| Clip_v3.5.stl | 277.3KB | |
| E3D_cooler_v0.6.iges | 8.0MB | |
| E3D_cooler_v0.6.step | 6.7MB | |
| Link_v3.5_flat.stl | 71.2KB | |
| Nozzle_fan_v3.5.stl | 101.9KB |
