Marlin options for the sensor:
define X_PROBE_OFFSET_FROM_EXTRUDER 39.5 //To the RIGHT of the nozzle - in the 3D model
define Y_PROBE_OFFSET_FROM_EXTRUDER -13.37 //To the BACK of the nozzle - in the 3D model
define Z_PROBE_OFFSET_FROM_EXTRUDER -5 //HERE PLEASE, START AT 0! The minus means that my nozzle goes DOWN after the autobed leveling procedure!!!
| Clamp.stl | 2.7MB | |
| SensorHolder_18mm.stl | 530.3KB | |
| X-Carriage_V5.stl | 557.9KB |
