This is a 40mm fan mount for the E3D V6 hotend. The fan is angled to enable it to fit into a tighter vertical space.
There are 2 different STL files.
The 32mm hole spacing is for a standard 40mm PC cooling fan.
The 35mm hole spacing is for fans i purchased on Ebay.
V2 MODELS HAVE SLIGHTLY LONGER ZIP TIE POINTS.
| Fan_Mount.SLDPRT |
| Fan_Mount_32mm_Hole_Spacing.STL |
| Fan_Mount_32mm_Hole_Spacing_V2.STL |
| Fan_Mount_35mm_Hole_Spacing.STL |
| Fan_Mount_35mm_Hole_Spacing_V2.STL |
