E3D V5 & V6 SINGLE & DUAL Fan Duct Holder (Prusa I3) VER 2.0 3D Printer Model
The file 'E3D V5 & V6 SINGLE & DUAL Fan Duct Holder (Prusa I3) VER 2.0 3D Printer Model' is (stl,FCStd,scad) file type, size is 77.5MB.
The file 'E3D V5 & V6 SINGLE & DUAL Fan Duct Holder (Prusa I3) VER 2.0 3D Printer Model' is (stl,FCStd,scad) file type, size is 77.5MB.
Design based here :
http://www.thingiverse.com/thing:533029
(for E3D_v5_v6_40mm_Duct.stl and E3D_v5_v6_40mm_Duct_Mirrored.stl)
and here :
http://www.thingiverse.com/thing:958827
If you want the SINGLE fan version print :
E3Dv5-Holder.stl OR E3Dv6-Holder.stl (pick your extruder version)
AND
E3D_v5_v6_40mm_Duct.stl
OR
E3D_v5_v6_40mm_Duct_Mirrored.stl
if you want the DUAL fan version print
E3Dv5-Holder.stl OR E3Dv6-Holder.stl (pick your extruder version)
AND
Fan-Duck-Left - repaired - oriented.stl
AND
Fan-Duck-Right - repaired - oriented.stl
This version of fan duct is not yet tested.
Needs 4 screws M3 25mm long
2 fans 40mm left/right
1 fan 30 mm central
You might need also a zip tie in order to hold the hole system to the e3d barrel.
I am pretty sure that this version will work extremely well.
If you test it let me know in the comments below.
More info here :
http://www.trustfm.net/hardware/3DPrinter.php
I have added fan guards modifying this :
https://www.thingiverse.com/thing:128718
| E3Dv5-Holder.stl | 107.1KB | |
| e3dv5.FCStd | 37.8MB | |
| E3Dv6-Holder.stl | 106.6KB | |
| e3dv6.FCStd | 37.7MB | |
| E3D_v5_v6_40mm_Duct.stl | 1.8MB | |
| E3D_v5_v6_40mm_Duct_Mirrored.stl | 842.0KB | |
| Fan-Duck-Left_-_repaired_-_oriented.stl | 715.6KB | |
| Fan-Duck-Right_-_repaired_-_oriented.stl | 1.4MB | |
| FanGuard-30mm.scad | 4.2KB | |
| FanGuard-30mm.stl | 531.8KB | |
| FanGuard-40mm.scad | 4.2KB | |
| FanGuard-40mm.stl | 591.7KB |
