Hare are my designs for custom parts on the E3D Bigbox printer.
Thanks to Ephemeris at the E3D forums for the initial Nut trap clip design. Forum thread:
https://forum.e3d-online.com/index.php?threads/simple-retainer-for-nut-traps.882/
The nut trap clip I printed with layer height at 0.25 and width 0.4. Pretty slow printing because of the small details. I spent 3 - 4 hours printing 70 clips.
Thanks to JvdP on the E3D forums for his "Project Whisper" Making BigBox Quiet thread. You can find more info on silencing the Bigbox here:
https://forum.e3d-online.com/index.php?threads/project-whisper-making-bigbox-quiet.914/
The temp probe for RUMBA fits on top of the JTAG connector and is a tight fit. You might have to lower extrusion rate if it is too tight. Try different extrusion widths to get it right.
Update: I had misunderstood where the exhaust fan would be located. I have removed the exhaust fan bracket.
| Bigbox_nut_trap_clamp_v4.stl | 4.6KB | |
| Bigbox_nut_trap_clip_v4.f3d | 209.6KB | |
| Bigbox_RUMBA_temp_probe_clamp.stl | 11.8KB | |
| Bigbox_RUMBA_temp_probe_clamp_v2.f3d | 135.9KB |
