E30 Door Mold Clip 3D Printer Model
The file 'E30 Door Mold Clip 3D Printer Model' is (stl,f3d) file type, size is 118.2KB.
The file 'E30 Door Mold Clip 3D Printer Model' is (stl,f3d) file type, size is 118.2KB.
Replace the broken clip in your E30 door molds.
Remove the broken piece by prying it out with a screwdriver, then install the new one with small dab of epoxy or silicone to secure it in place (might not be required).
For a coupe you will need 6 pieces as circled in green on the door molds picture.
They are parts #1A and #1B in the car side picture.
OEM PN is not applicable.
Using this piece you can also fabricate part #4: print one with 100% infill, cut the plastic stud then tap in an M4 hole and insert an M4 bolt after you cut its head.
Print settings:
Use ABS plastic and print the piece laying flat on its face as shown in the picture and as oriented in the file with 4 walls at least to get the strongest possible outcome.
Fusion 360 file attached.
| E30_Door_Mold_Clip.stl | 83.9KB | |
| E30_Door_Mold_Clip_V1.f3d | 100.2KB |
