Dyson V6 Wall Mount / Holder 3D Printer Model
The file 'Dyson V6 Wall Mount / Holder 3D Printer Model' is (stl) file type, size is 93.0KB.
The file 'Dyson V6 Wall Mount / Holder 3D Printer Model' is (stl) file type, size is 93.0KB.
This is a wall mount that enables proper securing and charging of dyson v6 vaccuum cleaners (not an upside-down mount).
You can mount the dyson with accessories attached.
The project requires screws for wall mounting, and the mounting of the pull tab to the slider. I used M3x10 screws with a flat screwhead for mounting the pull tab.
Besides screws, the slider also has a rubber band / spring mount for automatic downward retraction. This is optional, but i recommend using a rubberband between the slider and base.
Some filing or sanding may be required for the slider, due to printer-specific tolerance deviations.
| base_holder.stl | 63.4KB | |
| everything.stl | 251.1KB | |
| pull_tab.stl | 140.1KB | |
| spring_slider.stl | 47.7KB |
