I made this dymaxion globe after I had seen it on tested. I used a nice sheet of olive plywood (3mm) and antique-like brass 3x10 mm wood screws.
I used the fuller projection from PandaCNC (https://www.thingiverse.com/thing:2497223) and had to import it in Corel Draw and had to reposition the holes. The cdr file has two layers because I had to separate the engraving and cutting. I “cutted” the gridlines with lower power because I couldn’t do vector engraving.
I also changed the insert a little bit, because the tip made some trouble and I saved a little bit of printing time.
At least I made a little display for the globe out of three pieces of plywood. It holds the globe along on edge.
Thanks to Gav for the nice idea!
Thanks to PandaCNC for the fuller projection.
I made a remix to share my files.
| dymaxionglobe.cdr | 281.3KB | |
| dymaxionglobe.svg | 261.6KB | |
| holder_dymaxionglobe.cdr | 24.1KB | |
| holder_dymaxionglobe.svg | 1.6KB | |
| icosahedron_insert_v04.stl | 73.5KB |
