DYI LVS34 Pole 3D Printer Model
The file 'DYI LVS34 Pole 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'DYI LVS34 Pole 3D Printer Model' is (stl) file type, size is 1.0MB.
This is for the garmin lvs34 livescope may work with others
you will need a 8 ft 1/2 inch pvc or similar pipe
I've also included several different Holders (Super_Tumelo.stl, Incredible_Blad_3.stl) this would get mount to the ie of the boat, so if you dont have a boat you can mount it to you will need to come up with something to hold the pole in place.
| Clampv2_1.stl | 252.7KB | |
| Incredible_Blad_3.stl | 298.7KB | |
| lv34nut.stl | 144.6KB | |
| LVA34Holder_R4_1.stl | 129.7KB | |
| LVA34Holder_R4_2.stl | 129.7KB | |
| lvs34CableClampv2_2.stl | 531.8KB | |
| lvs34MainHolderv3_2.stl | 167.5KB | |
| lvs34Nuts_2.stl | 160.6KB | |
| LVShalfinchv5.stl | 182.5KB | |
| Right_Angle_half_inch_1.stl | 160.7KB | |
| Sizzling_Trug_1.stl | 134.2KB | |
| Super_Tumelo.stl | 285.0KB |
