Dusk Ball, With Magnetic Clasp (6th Gen) 3D Printer Model

Author: @
License: CC BY-SA
File formats: stl
Download type: zip
Size:147.2KB

The file 'Dusk Ball, With Magnetic Clasp (6th Gen) 3D Printer Model' is (stl) file type, size is 147.2KB.

Summary

This version of the dusk ball with magnetic clasp is based off of the models from the 6th gen 3DS games. For 5th gen see: http://www.thingiverse.com/thing:1081593

Print all the parts out. Print two of the Dusk_BlackShell_6thGen.stl you will need one for the lid and one for the bottom shell.

All the lid parts snap together really tightly so you wont need glue, usually.

After assembling the lid and the bottom you can glue the button and the ring to the bottom with the hinge in place as you glue the ring down. Then snap the hinge into the lid.

You will also need 2 magnets (1/4" X 1/16"). Just glue them in place.

Tip: Print your bottom piece at a higher in fill percentage, around 40-50% and then all the other parts at 5-10%. That way it will be bottom heavy and not roll around as much.

Dusk_BlackShell_6thGen.stl 64.7KB
Dusk_Button.stl 45.3KB
Dusk_GreenShell_Bottom_6thGen.stl 73.6KB
Dusk_GreenShell_Top_6thGen.stl 95.1KB
Dusk_Ring.stl 119.7KB
Hinge.stl 53.7KB