This version of the dusk ball with magnetic clasp is based off of the sprite from the 5th gen DS games. For 6th gen see: http://www.thingiverse.com/thing:1081574
Print all the parts out. Print two of the Dusk_BlackShell_5thGen.stl you will need one for the lid and one for the bottom shell.
All the lid parts snap together really tightly so you wont need glue, usually.
After assembling the lid and the bottom you can glue the button and the ring to the bottom with the hinge in place as you glue the ring down. Then snap the hinge into the lid.
You will also need 2 magnets (1/4" X 1/16"). Just glue them in place.
Tip: Print your bottom piece at a higher in fill percentage, around 40-50% and then all the other parts at 5-10%. That way it will be bottom heavy and not roll around as much.
| Dusk_BlackShell_5thGen.stl | 69.2KB | |
| Dusk_Button.stl | 45.3KB | |
| Dusk_GreenShell_Bottom_5thGen.stl | 76.0KB | |
| Dusk_GreenShell_Top_5thGen.stl | 97.3KB | |
| Dusk_Ring.stl | 119.7KB | |
| Hinge.stl | 53.7KB |
