This is a remix of the Dupont Cable Organizer Customizable. I created this remix because the original organizer bridges didn't fit inside the build volume of the Monoprice Mini Delta. The included .scad file is a remix of the code made by the original author.
The side bridges have been replaced with a bottom bridge, which can now be split up into a number of bridge segments. The segments connect together using simple pegs and holes. If the pegs are too loose you can glue them together.
The example .stl model is again for 156 mm cables, but using the customizer you can change it to any cable length.
There is a parameter called "joinSubtractLength", which is a length subtracted from the total bridge length per join (hole + peg). This is to counteract the length added by imperfect joins between the bridge segments/combs. If your cables will not fit after you put the organizer together, you may have to adjust this parameter.
I want to thank the original author for introducing me to OpenSCAD.
| dupont_organizer_segmented.scad | 5.9KB | |
| dupont_organizer_segmented_bridge_156mm.stl | 23.5KB | |
| dupont_organizer_segmented_comb_156mm.stl | 70.3KB | |
| dupont_organizer_segmented_plate_156mm.stl | 166.1KB |
