There is my adaptation of Zoozafone great Dummy 13!!!
It is a mix between Dummy and a robot from the anime Robotech (US) or Macross (JP).
In order to improve the adhesion to the print bed, I used the same method of placing the pieces as Zoozafone.
I'ved printed it at 200%, so that the model would be more robust.
I'm attaching the Blender project file. Your imagination will be your limit. ;-)
If you need a particular part, you can refer to the basic Zoozafone model.
For the 200% assembly, I recommend a good pliers, like waterpipe pliers, and a little strength.
Assembly instructions can be found here (original model):
https://www.printables.com/model/981111-dummy-13-version-10/files
dummy 13 v1_0 assembly guide.pdf
Stand for Dummy 13:
https://www.printables.com/model/999989-dummy-13-simple-display-stand
The original Dummy 13:
https://www.printables.com/model/981111-dummy-13-version-10
DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0
Part of the robot can be found here:
https://cults3d.com/en/3d-model/game/unseen-phoenix-hawk-variants-for-battletech-tabletop-games
| Armor_runner_v3.stl | 13.0MB | |
| Frame_runner_v3.stl | 9.2MB | |
| VF-1J_Dummy_13_project.blend | 22.7MB |
