Duet Wifi Case Prusa Style 3D Printer Model
The file 'Duet Wifi Case Prusa Style 3D Printer Model' is (stl,f3z,step) file type, size is 7.4MB.
The file 'Duet Wifi Case Prusa Style 3D Printer Model' is (stl,f3z,step) file type, size is 7.4MB.
I've build a Prusa Mk3S BEAR from scratch, using a Duet Wifi.
I wanted to keep the style of Prusa Einsy Case, so i've modify it to fit the Duet Wifi and add a place to fit a 404010 fan (i used a noctua). I also added a bunch of place to attache the cables with zip ties (2mm wide max). I let you look my cable management in the photo to inspire you :D
Hardware needed:
M5 8mm x9
M3 10mm x11
M3 12mm (for fan) x4
M3 40mm x1
M3 nut x2
M3 slim square nut x7
I hope you'll enjoy it and if you like it, don't hesitate to throw a tip to support me :D
March 30 2020 Update:
I made the door a bit slimer (something like 0.5mm), a created a clip for the down side so it's way more easier to add or remove cables.
I have remodeled the different clip to make it less polygon looking, and other small changes, as the upper connector hole that are more accessible from the outside (especially for the sd) and a bit better fitment.
I also added a reset switch
Hope you'll like it !
| Base.stl | 551.7KB | |
| Bed_clip.stl | 261.4KB | |
| Door.stl | 204.7KB | |
| Duet_case_v35.f3z | 4.7MB | |
| Duet_case_v35.step | 14.5MB | |
| Extruder_Clip.stl | 150.6KB | |
| Lower_back_support.stl | 172.2KB | |
| Lower_hinge.stl | 291.4KB | |
| Power_clip.stl | 172.5KB | |
| reset_button.stl | 3.0KB | |
| Upper_back_support.stl | 120.6KB | |
| Upper_hinge.stl | 290.4KB |
