Duet Wifi 2020/3030 Case 3D Printer Model
The file 'Duet Wifi 2020/3030 Case 3D Printer Model' is (stl,stp) file type, size is 1.7 MB.
The file 'Duet Wifi 2020/3030 Case 3D Printer Model' is (stl,stp) file type, size is 1.7 MB.
A case to fit to a Duet wifi to an 2020/3030 extrusion with a 40mm fan. It is designed to be mounted vertically with the fan on the bottom and exausting on the side so no debris can fall in. It has an airflow guide underneath to cool the drivers and vents which are probably enough to cool the bed mosfet, I use an external mosfet so I can't be certain on this.
There are three screw holes on the side which will make it sit flush to a 2020/3030 extrusion with the cables leaving the side, make sure you print the version for your extrusion type.
12-dec-2019: Lid_V2 added, it has a higher rib profile so it's stiffer.
| Bottom_V1.stl |
| Bottom_V1.stp |
| Bottom_V1_3030.stl |
| Bottom_V1_3030.stp |
| Lid_V1.stl |
| Lid_V1.stp |
| Lid_V2.stl |
