My second attempt at a drone, made a narrow ducted design to be able to easily fly Indoors and wanted it to fit on the 120x120 bed on the MP Select Mini
Simple design, just two main parts.
Uses a FLF 3 Evo Cleanflight FC with integrated FlySky receiver, works great with the cheap and competent Turnigy 9X.
Print and Clean, insert FC in the lower part and snap into large frame and youre done, attach battery pack using a rubber band or similar.
EDIT: added an optional battery tray for the battery packs listed below.
Parts I used:
FLF3 Evo FC.
With FlySky RX: https://hobbyking.com/en_us/flf3-evo-brushed-flight-controller-integrated-flsky-rx.html
With FrSky RX: https://hobbyking.com/en_us/frf3-evo-brushed-flight-controller-integrated-frsky-rx.html
Motors, Brushed 8.5X20mm
https://hobbyking.com/en_us/brushed-motor-4-pcs-per-set.html
Props, Walkera 55mm
https://hobbyking.com/en_us/propellers-2-standard-2-reverse-rotation-qr-ladybird-micro-quad-q-bot.html
Batteries, NanoTech 1S 500mah, uses same connector
https://hobbyking.com/en_us/turnigy-nano-tech-500mah-1s-25-50c-lipo-pack-losi-mini-compatible.html
Print, Solder motors to FC, Bind TX, Calibrate FC, Connect battery and fly.
| DRONE1.stl | 2.7MB | |
| DRONE2.stl | 336.4KB | |
| DRONE_TRAY.stl | 191.9KB |
