DualSense Magnetic Charge Station 3D Printer Model
The file 'DualSense Magnetic Charge Station 3D Printer Model' is (stl) file type, size is 50.6KB.
The file 'DualSense Magnetic Charge Station 3D Printer Model' is (stl) file type, size is 50.6KB.
This is a remix of the design by kishkalva.
I wanted to have a horizontal charging station for a single controller where i don't have to fiddle with attaching the cable.
I had some spare magnetic USB charge cables around that i use for charging various devices and i used one spare for this purpose.
I adjusted the single controller design to hold the end of such a cable in place so that i can simply just place the controller in the dock where the magnetic plug attaches itself automatically to the controller and decouples when i pull out the controller.
I added some grooves on the bottom and back to route the usb cable so its firmly attached as well as being able to place the dock flat on the table.
A two piece cable holder is also attached that needs to be glued to the back. This i designed so that the cable won't pop out from the whole stand. Not the most elegant but it works.
Charging cable used for this project:
https://www.aliexpress.com/item/4000453430661.html?spm=a2g0s.9042311.0.0.27424c4diYC6ix
| Charge_Stand.stl | 97.2KB | |
| USB_Back_Holder_1.stl | 22.5KB | |
| USB_Back_Holder_2.stl | 23.1KB |
