The file 'Dual Extrusion Oriental Dragon 3D Printer Model' is (stl,obj) file type, size is 84.6 MB.
We loved the Lung Oriental Articulated dragon by @7Fish, thank you @7Fish for providing the source files, this allowed us to create a dual extrusion version of the dragon.
We also tried to increase size the holes of the segments, as we found that it was too tight a fit for us to connect the segments using PLA. And we added a hole through so we could insert a metal wire to keep the prints together and also bend the dragon,and provide stiffness.
02a.stl |
02b.stl |
03a.stl |
03b.stl |
04a.stl |
04b.stl |
05a.stl |
05b.stl |
06a.stl |
06b.stl |
07a.stl |
07b.stl |
08a.stl |
08b.stl |
09a.stl |
09b.stl |
10a.stl |
10b.stl |
11a.stl |
11b.stl |
12a.stl |
12b.stl |
13a.stl |
13b.stl |
14a.stl |
14b.stl |
15A.stl |
15B.stl |
16a.stl |
16b.stl |
17a.stl |
17b.stl |
18a.stl |
18B.obj |
18b.stl |
19a.stl |
19b.stl |
20a.stl |
20b.stl |
21a.stl |
21b.stl |
22a.stl |
22b.stl |
23a.stl |
23b.stl |
24a.stl |
24b.stl |
25a.stl |
25b.stl |
26a.stl |
26b.stl |
27a.stl |
27b.stl |
28a.stl |
28b.stl |
29a.stl |
29b.stl |
30a.stl |
30b.stl |
31a.stl |
31b.stl |
32a.stl |
32b.stl |
33a.stl |
33b.stl |
34a.stl |
34b.stl |
35a.stl |
35b.stl |
36a.stl |
36b.stl |
37a.stl |
37b.stl |
38a.stl |
38b.stl |
39a.stl |
39b.stl |
40a.stl |
40b.stl |
41a.stl |
41b.stl |
42a.stl |
42b.stl |
43a.stl |
43b.stl |
44a.stl |
44b.stl |
45a.stl |
45b.stl |
Back_Leg_Foot_a.STL |
Back_Leg_Foot_B.STL |
Back_Leg_Lower.STL |
Back_Leg_Middle.STL |
Back_Leg_Upper.STL |
Claw_Finger_A.stl |
Claw_Finger_B.stl |
dragon_tail.stl |
eye_white.stl |
head_a.stl |
head_b.stl |
Head_Feeler.STL |
Head_Horn.STL |
Head_Jaw_A.stl |
Head_Jaw_B.stl |
Head_To_Neck_Pin.STL |
Head_Tung.STL |