Dual Cold Shoe For Camera Or Equipment 3D Printer Model
The file 'Dual Cold Shoe For Camera Or Equipment 3D Printer Model' is (stl) file type, size is 1.9MB.
The file 'Dual Cold Shoe For Camera Or Equipment 3D Printer Model' is (stl) file type, size is 1.9MB.
Designed and modeled after RODE's Cold shoe. Full set STL has everything as needed ready to print, glue and use.
How to:
Screw and nut STLs included as separate files. as it is a little tricky to get the nut and screw to use properly.
Apply Pressure evenly as you screw. Once started, slow tighten then loosen, and work your way down. I found it easiest, once started, to slip the foot into camera hot shoe and work it that way.
Once the nut and foot freely screw together, apply glow to the foot to the insert of the Dual Cold Shoe.
| Dual_Cold_shoe_Ful_Set.stl | 2.4MB | |
| Dual_Cold_Shoe_v1.stl | 142.2KB | |
| foot_no_stop.stl | 1.3MB | |
| foot_with_stop.stl | 1.3MB | |
| nut.stl | 968.6KB |
