The file 'Dual 2″ Gauge For Flight Simulator 3D Printer Model' is (stl,pdf,fcstd,dwg) file type, size is 1.0MB.
Generic Dual Gauge for use in panel of GA Flight Simulators.
It's need 2 servos of 9gr. like SG90, or HK15168, and will be conected to the PC with the flight simulator via OpenCockpits Servo Board, a Arduino + FS2Link or similar system.
Designed to be installed in front or from behind a panel, using M3 screws.
Need a 2mm axis, like comet rod or similar and 2 small screws (recycled from toys or similar).
Some parts need to be glued.
I use 3M repositionable glue in spray to glue papel printed parts to a transparent plastic sheet in order to imitate glass of gauge, check the photos.
| background.stl | 40.9KB | |
| base.stl | 41.5KB | |
| bezel_54mm.stl | 39.7KB | |
| chanfer.stl | 25.5KB | |
| dual_gauges_background.pdf | 618.1KB | |
| dual_gauge_mini_v1.04.fcstd | 513.6KB | |
| external_bezel.stl | 39.9KB | |
| gauges_background.dwg | 70.8KB | |
| needle.stl | 10.2KB | |
| ring_54mm.stl | 24.8KB | |
| servo_HK15168.stl | 19.5KB | |
| servo_twpro_sg90.stl | 20.3KB |
