Dual 18650 Clip Mount 3D Printer Model
The file 'Dual 18650 Clip Mount 3D Printer Model' is (stl) file type, size is 24.8KB.
The file 'Dual 18650 Clip Mount 3D Printer Model' is (stl) file type, size is 24.8KB.
Clamp/holder/mount for two single-18650 holders from you can find on AZ as shown in the screenshot. The "18650 Battery Clip 18650 Battery Holder 18650 Batteries Case for 18650 Battery with Connect Lead" has a mounting hole in the middle centered under the battery space, but it only has a 1-2mm recess for a screw head. Maybe a pop rivet would work without pushing the battery up, but doubtful a screw would so I created a 2-space clamp/holder that these 18650 Battery Clip's just slide into. Probably would not use these battery clips again, but I have 10 so this will help me use them.
This requires it be mounted on some backing surface as the clips otherwise might fall out the back.
Holes are designed for M3 screws and are laid positioned on 5mm spacing intervals so as to fit outdoor enclosure mount plates.
The picture example is printed in white ABS to help handle outdoor temps, but would work with just about any filament besides electrically conductive types. May require supports depending on your filament and setup.
FTIJPI
Enjoy and make posts welcome
| Dual18650-v2.1.stl | 120.7KB |
