This model is approximately 1:25 scale, with a 20 inch wingspan. I don't have any pictures of the completed model because I gave it away- you'll just have to believe me that it looks good.
The remix source model is simpler, but requires painting, and is a smaller scale. These components may not be perfect: I believe in you to do minor scaling adjustments in your slicer.
The GDA is functional, but the ball-and-socket can be fragile. I do not recommend scaling this model down because of these parts. I have printed this model as small at 75% successfully. not sure if you could go much smaller.
Body: Gold
All EC Horns: Black
GDA p1: Black
GDA p2: White
GDA p3: Black
SCT: silver
DiPole body: Silver
DiPole: Black
MBR and MBX: white
....3 bottom layers, 0 top layers, 1 or 2 walls
....Grid infill, 45%-55%, infill line direction 0 or 90 o 180
Rod Half: Black (2x)
SA connector: silver or black
SA base: black
SA top: black, then gold.
....0.12 layer height; 0.2 initial layer height
....2 bottom layers, 0 top layers, 2 walls
....Grid infill, 15%-25%, infill line direction 0 or 90 o 180
Radiator inserts: silver (may need to be re-sized)
| DiPole.stl | 7.3KB | |
| DiPole_Body.stl | 1.0MB | |
| DSCS_Body.stl | 3.1MB | |
| EC_horns_1.stl | 74.3KB | |
| EC_horn_2_2x.stl | 60.1KB | |
| GDA_p1.stl | 539.2KB | |
| GDA_p2.stl | 128.9KB | |
| GDA_p3.stl | 226.2KB | |
| MBR_2x.stl | 57.6KB | |
| MBX.stl | 459.1KB | |
| Radiator_inserts.3mf | 40.1KB | |
| Rod_half.stl | 38.6KB | |
| SA_base_2x.stl | 2.4KB | |
| SA_connector_2x.stl | 53.2KB | |
| SA_top_4x.stl | 684.0B | |
| SCT_antenna.stl | 87.9KB |
