drylin® linear bearing from igus®
The so called RJMP-01-08 is a bearing made for linear movements.
It reaches similar wear-characteristics than the injection molded one, if you print it out of iglidur® tribo-filament.
The bearing should fit without rework? Then use one of the 3d-models with clearance; 0,3 mm clearance works best to get at the end a part with a very little clearance.
Dimensions:
ID = 08 mm
OD = 16 mm
B = 25 mm (length)
Check www.igus.eu/tribofilament for more Information about 3d-printing wear-parts
Check www.igus-cad.com for all kinds of 3D-models of existing igus® parts
| RJMP-01-08_clearance_01_mm.stl | 1.0MB | |
| RJMP-01-08_clearance_02_mm.stl | 1.0MB | |
| RJMP-01-08_clearance_03_mm.stl | 1.0MB | |
| RJMP-01-08_clearance_04_mm.stl | 1.0MB | |
| RJMP-01-08_clearance_05_mm.stl | 1.0MB | |
| RJMP-01-08_no_clearance.stl | 1.0MB |
