Dryer Exhaust Vent Flap 3D Printer Model
The file 'Dryer Exhaust Vent Flap 3D Printer Model' is (stl) file type, size is 332.8KB.
The file 'Dryer Exhaust Vent Flap 3D Printer Model' is (stl) file type, size is 332.8KB.
The dryer exhaust port outside my house has 3 flaps which blow open when the dryer is running and close when the air stops. One of the flaps recently broke, necessitating a replacement.
Approximate dimensions:Body of flap: 104mm (width) x 32mm (height) x 1.5mm (thickness)
Retention tabs: 2.5mm (diameter) x 4.3mm (length)
In the USA, dryer exhaust temperatures are regulated to NOT exceed 180°F (82°C). Since it will also be used outdoors, sun/heat are also factors to consider when choosing a print material. As you probably know, the glass transition temperatures for common 3D filaments are:
PLA: 60°C
PETG: 88°C
ABS: 105°C
Therefore, PLA is NOT recommended for this print! PETG would be the minimum, with ABS being probably the more ideal material.
| Vent_Flap.stl | 1.1MB |
