3.feb.2019 - Soon it will be replaced by version 5. Completely NEW!!
For beautiful polish and patina.
I print from ABS Fillamentum. Mini pulley to motor (part 4) is better printing from PLA.
Needed:
1x motor SPEED 280 or SPEED 400 (cca 1000-6000 rpm) or similar
1x power adapter for motor (3-6V/2A DC)
2x screw to motor
3x rubber
2x threaded rod M6, 220mm
2x threaded rod M6, 190mm
19x nut M6
14x washers 6mm
3x hair rubber band - rubber pulleys
super glue
part 1 - sidewall - print 2x
part 2 - pulley transmissions - print 1x (is mounted on the shaft freely!!)
part 3 - pulley transmissions - print 1x
part 4 - SPEED 280 pulley - print 1x
part 5 - pulley cylinder (transfer 1:1) - print 2x
part 6 - cylinder front - print 2x
part 7 - cylinder - print 2x
New version 05.03.2017 - v4
smaller size
better gear ratio
New version 28.10.2016 - v3
smaller size
better performance
better gear ratio
rubber last longer
Old v3 in a zip file. Blue photos is a v3.
| Drum_polisher-v3.zip | 1.1MB | |
| v4p0-SudovaLesticka.123dx | 146.1KB | |
| v4p1-DrumPolisher-sidewall.stl | 221.1KB | |
| v4p2-DrumPolisher-roller.stl | 151.1KB | |
| v4p3-DrumPolisher-roller.stl | 151.1KB | |
| v4p4-DrumPolisher-roller.stl | 52.0KB | |
| v4p5-DrumPolisher-roller.stl | 119.3KB | |
| v4p6-DrumPolisher-cover.stl | 436.4KB | |
| v4p7-DrumPolisher-cylinder.stl | 415.7KB | |
| v4p8-DrumPolisher-container.stl | 315.8KB | |
| v4p8-Nadoba.123dx | 98.3KB | |
| v4p9-DrumPolisher-cover.stl | 793.6KB |
