Dropper Paint Bottle Rack – Any Length 3D Printer Model
The file 'Dropper Paint Bottle Rack – Any Length 3D Printer Model' is (stl,step) file type, size is 3.5MB.
The file 'Dropper Paint Bottle Rack – Any Length 3D Printer Model' is (stl,step) file type, size is 3.5MB.
Build a rack for dropper paint bottles (such as Vallejo 17ml or Army Painter 18ml) using 4mm rods or dowels.
3 rods simply clip or slide onto the brackets, holding bottles at a 40° angle and a total height of 63mm (for Vallejo). Multiple brackets can be used for longer lengths to prevent rods from bending under the weight.
Multiple rows of racks can be held together using the built-in hook. There are also 3 row brackets which increase overall rigidity over joining 3 individual rows.
Included are brackets with 3.9mm, 4.0mm and 4.1mm holes to accommodate rods not exactly 4.0mm. Pictured are 4mm (actually 3.85mm) fibreglass rods for Roman blinds, trimmed to 500mm lengths, using the 3.9mm hole bracket.
No supports.
| paint_rack_-_3-16_inch_rods_-_with_hooks.stl | 282.8KB | |
| paint_rack_-_3.9mm_rods_-_3_rows.stl | 2.4MB | |
| paint_rack_-_3.9mm_rods_-_without_row_hooks.stl | 529.9KB | |
| paint_rack_-_3.9mm_rods_-_with_row_hooks.stl | 1.4MB | |
| paint_rack_-_4.0mm_rods_-_3_rows.stl | 2.4MB | |
| paint_rack_-_4.0mm_rods_-_without_row_hooks.step | 56.1KB | |
| paint_rack_-_4.0mm_rods_-_without_row_hooks.stl | 529.6KB | |
| paint_rack_-_4.0mm_rods_-_with_row_hooks.step | 131.1KB | |
| paint_rack_-_4.0mm_rods_-_with_row_hooks.stl | 1.4MB | |
| paint_rack_-_4.1mm_rods_-_3_rows.stl | 2.4MB | |
| paint_rack_-_4.1mm_rods_-_row_with_hooks.stl | 1.4MB | |
| paint_rack_-_4.1mm_rods_-_without_row_hooks.stl | 529.4KB |
