This design its created for M3 screw and spacers,the carbon or alum tube used are 16mm/D ,prety design for winter flyers,I advise to use with 900Kv or upper motors , with LI.PO 3s,the autopilot is consumer choice.
| esc_holder.stl | 155.7KB | |
| rotor_frame_007.stl | 750.3KB | |
| rotor_frame_GIMBOT.stl | 2.6MB | |
| rotor_mount_03.stl | 768.8KB | |
| top_rotor_frame_resize.stl | 1.3MB |
