Droid Restraining Bolt Arriflex Lens 3D Printer Model
The file 'Droid Restraining Bolt Arriflex Lens 3D Printer Model' is (stl) file type, size is 128.9KB.
The file 'Droid Restraining Bolt Arriflex Lens 3D Printer Model' is (stl) file type, size is 128.9KB.
This is a model replica of a restraining bolt that we commonly see on droids from a galaxy far, far away. :)
The domed bolt top has been modelled into the model. You can always grind it off if you want to use a real bolt to secure it to your object.
*Edit: the V2 version now has a centred 5mm hole, 30mm deep into the bottom of the bolt. This makes it easier to insert a drill bit or metal rod into the restraining bolt and will allow you to spin in on a drill and enable quick sanding / smoothing of any print lines from the surface by simply holding your sandpaper against the object as it spins. I suggest starting with 220 grit, then 400 grit and then using Duplicolor filler primer. Sand and prime again, repeat if needed.
| panda_restraining_boltV2.stl | 460.5KB |
