There are two versions of the turbine. One with shaft and 4mm hex in one part, and the two part version thats easier to print, but requires three additional screws.
With the drill I use (Makita DHP 485, max rpm 1900) it pumps about 60L per minute.
Bearing dimensions are 16mm inner diameter, 30mm outer diameter and 10mm thickness.
The hose adapter is made for 16mm hoses. I only had 18mm hose, so I had to use some tape to make it fit.
All other screws needed are named in the pictures. Have fun with it!
| Hex-adapter.stl | 70.4KB | |
| Hose-Adapter.stl | 114.8KB | |
| Housing.stl | 239.0KB | |
| Top.stl | 66.9KB | |
| Turbine+4mmHex.stl | 137.0KB | |
| Turbine.stl | 110.6KB |
