The file 'Dremel 220 Drill Press Storage Basket 3D Printer Model' is (stl) file type, size is 7.0MB.
Gone are the days when I lose those T-slot clamps, and carriage bolts + wing nuts that I used to hold my XY table on my drill press.
This is a small storage basket designed for the Dremel 220 drill press to keep those things handy and tidy.
The basket is a half-circle with a diameter of 170mm (a few millimeters smaller than the steel base, so if you bump it while moving the drill press, most of the stress will go through the steel base rather than the 3D print).
The lower part (under the basket) is optional and only necessary if you plan to store heavy items in the basket.
The clamp and basket are secured together with two M5x16mm bolts in the knurling buttons and two M5 nuts.
The upper and lower parts of the basket are joined together using six short M3x5mm screws and insert nuts.
Enjoy!
If you want an amazing LED light ring for your Dremel 220 drill press, please see other project : https://www.thingiverse.com/thing:6822878
Note I also have a bigger version of this for a 3-inch column drill press.
Reference: https://www.thingiverse.com/thing:6800931
Dremel_Drill_Press_Basket_-_Basket.stl | 4.9MB | |
Dremel_Drill_Press_Basket_-_Bottom.stl | 9.3MB | |
Dremel_Drill_Press_Basket_-_Clamp.stl | 2.1MB | |
Dremel_Drill_Press_Basket__-_M5-8mm_Knurling_Button.stl | 1.2MB |