DrawingBot With Improved Head And Rotate Pen (for Fountain Pen) 3D Printer Model
The file 'DrawingBot With Improved Head And Rotate Pen (for Fountain Pen) 3D Printer Model' is (stl) file type, size is 281.9KB.
The file 'DrawingBot With Improved Head And Rotate Pen (for Fountain Pen) 3D Printer Model' is (stl) file type, size is 281.9KB.
Based on DrawingBot by MakerC, with 5 new 3D/STL files that you can use to add improved slider stability for the head, including pen-tilt. You can set the rotation in 3 variations (straight / 25 degrees / 50 degrees).
In this build I've used a servo (MC-375DD), which has a slightly longer shaft section.
https://youtu.be/-gbldp3gtTE
Parts used to build:
Arduino code: (compiled and uploaded using the Arduino IDE; make sure to update config.h in your /Arduino/libraries/grbl folder to enable CoreXY !!!)
[More info on CoreXY here: http://corexy.com/theory.html]
Grbl Arduino firmware 0.9j (with stepper support) --> Use Gcode command M03 S050 to tilt the servo to release the pen; Use Gcode command M5 to raise the pen.
[https://github.com/robottini/grbl-servo]
Inkscape to draw/import/convert and generate Gcode files (from extensions menu)
[https://inkscape.org/en/]
Next STL upgrade to come: carrier that can rotate and lock for a fountain pen (45c angle)
Stuck? Just send me a message if you have any question about this build!
| base_slide.stl | 140.7KB | |
| bracket_for_strips.stl | 154.8KB | |
| pen_holder.stl | 287.4KB | |
| slider.stl | 173.5KB | |
| spacer.stl | 57.1KB |
