This is a new combination of drawers and shelves, which fit best to my needs. The size of the drawers is 12cm x 12cm and is ideal for the storage of electronic or small mechanical parts. But of course there is an infinite number of other uses in the household or workshop as well
It consists of 3 shelves (4, 5 and 6 drawers), 4 connectors which allow lining and stacking up the shelves and 16 different drawers (see pictures for the arrangement of compartments).
Print time of the drawers is roughly 3-5 h, depending on the number of compartments with 0.2mm resolution. Print time of the shelves is 17-19h depending on the number of drawers.
Credit goes to: cruzher for http://www.thingiverse.com/thing:1666929. I have added wholes on the back of the shelves to save material and print time.
I have added the connectors from Coogrrr (http://www.thingiverse.com/thing:1862446) and one additional connector.
NOTE: After some more practical test it turned out, the the connectores are too small and it's difficult to make them work. I'll update that soon. The current connectors will not be compatible with the new ones. Also the boxes with get an update, only wth respect to the connections.
The drawers and shelves are still compatible with those published earlier and can be combined.
UPDATE: Look for an extension of this system http://www.thingiverse.com/thing:2010577
| Connector-15mm-20170101-v1.stl | 2.2KB | |
| Connector-30mm-20170101-v1.stl | 2.2KB | |
| ConnectorHalf-30mm-20170101-v1.stl | 1.6KB | |
| ConnectorThreeQuart-30mm-20170101-v1.stl | 2.6KB | |
| Drawer-1x1-detail-20161231-v1.stl | 344.6KB | |
| Drawer-1x2-detail-20161231-v1.stl | 570.7KB | |
| Drawer-2x1-detail-20161231-v1.stl | 570.7KB | |
| Drawer-2x2-detail-20161231-v1.stl | 956.2KB | |
| Drawer-321-detail-20161231-v1.stl | 1.3MB | |
| Drawer-3x2-detail-20161231-v1.stl | 1.3MB | |
| Drawer-3x3-detail-20161231-v1.stl | 1.9MB | |
| Drawer-41wide-detail-20161231-v1.stl | 1.2MB | |
| Drawer-421-detail-20161231-v1.stl | 1.4MB | |
| Drawer-44long-detail-20161231-v1.stl | 1.6MB | |
| Drawer-4x2-detail-20161231-v1.stl | 1.7MB | |
| Drawer-4x3-detail-20161231-v1.stl | 2.3MB | |
| Drawer-4x4-detail-20161231-v1.stl | 2.9MB | |
| Drawer-5x1-detail-20161231-v1.stl | 1.2MB | |
| Drawer-5x2-detail-20161231-v1.stl | 2.0MB | |
| Drawer-5x4-detail-20161231-v1.stl | 3.5MB | |
| Shelf-X-4-Drawers-20161231.stl | 2.0MB | |
| Shelf-X-5-Drawers-20161231.stl | 2.6MB | |
| Shelf-X-6-Drawers-20161231.stl | 3.1MB |
