Drawer Hardware Drilling Guide 3D Printer Model
The file 'Drawer Hardware Drilling Guide 3D Printer Model' is (stl) file type, size is 14.6KB.
The file 'Drawer Hardware Drilling Guide 3D Printer Model' is (stl) file type, size is 14.6KB.
This is a drilling Guide for drilling holes for drawer pulls. Easy set up for multiple set ups.
One base jig is for 3",3.5"and 4" drawer pulls
One Base jig is for 2.5", 3" and 96mm Drawer pulls (Available at: https://www.redpah.com/product/2734/drawer-pull-drilling-guide to help fund our youtube projects)
Use a Kapro Combination square rule:
http://www.amazon.com/Kapro-325-M-Magnetic-Combination-Square/dp/B000N6MS9M/ref=sr_1_1?ie=UTF8&qid=1461358822&sr=8-1&keywords=kapro+combination+square
Need (3) 12mm x 4 or (6) 12mm x 2 neodymium magnets
I suggest purchasing packages of 50 for about $5-$8 from ebay. These can be used for many projects. If they are coming from China, expect to wait a while.
Center Punch: http://www.harborfreight.com/hand-tools/punches/spring-loaded-center-punch-621.html
| Drawer_drilling_guide_bottom_3_3.5_4.stl | 42.1KB | |
| Drawer_drilling_guide_center_slide.stl | 7.5KB | |
| Drawer_drilling_guide_top.stl | 9.7KB |
