A make would be highly appreciated
I created two “versions” with different sizes:
120x55mm
355x55mm
120x70mm
355x70mm
The connector is 2mm higher than the original one.
If you use the connector cut off a little piece on the end of each divider to make it smaller.
| Connector_6mm_for_55mm.stl | 10.4KB | |
| Schubladen_Teiler_120_x_55mm.stl | 213.2KB | |
| Schubladen_Teiler_120_x_70mm.stl | 213.2KB | |
| Schubladen_Teiler_355_x_55mm.stl | 636.2KB | |
| Schubladen_Teiler_355_x_70mm.stl | 635.8KB |
