A playful carrier/holder for your business cards. Assemble the carrier by gluing or use the solid model (*without spring). Engraving is top layer both side walls, 0.4mm thick.
Suitable for both 88.9mm x 50.8mm and 84mm x 55mm size cards.
Card carrier and holder can be used separately. Take it with you and when at the office place it in the holder.
Show your cards, put your cards on the table, have your cards drawn..
| Foot.stl | 533.4KB | |
| Holder_one_piece.stl | 369.8KB | |
| Sideplate_Spring.stl | 190.5KB | |
| Sides.stl | 188.3KB | |
| Spacer.stl | 15.5KB | |
| Spacer_Spring.stl | 17.5KB | |
| Spring.stl | 13.6KB |
