Dragonball Radar – Alarm Clock 3D Printer Model
The file 'Dragonball Radar – Alarm Clock 3D Printer Model' is (stl,ino,zip) file type, size is 1.9MB.
The file 'Dragonball Radar – Alarm Clock 3D Printer Model' is (stl,ino,zip) file type, size is 1.9MB.
Alarm clock with dragonball design - ESP32 and VS1053B
dragonball in front (scale 30% from https://www.thingiverse.com/thing:2005826)
Screen made with laminator (draw grid)
ESP32 DEV Module
VS1053B https://learn.adafruit.com/adafruit-music-maker-featherwing/overview (not the best but i have one) (Mini MP3 DFplayer is better and don't need amplifier)
HT16k33 yellow
7x LED 4mm yellow
1x LED 5mm White
4x buttons
1x potentiometer 10k
1x speaker 3Watt 4ohm
amplifier for sound (not useful with Mini MP3 DFplayer) :
NPN NP 2222, 4.7 kohm, 10µF 50v
button on top : stop alarm and reset
put button with wires soldered in the hole on top of boitier.stl (two holes available for wires, choose one)
button B1 : set alarm
button B1 & button B2 : set minutes
button B1 & button B3 : set hour
potentiometer : set sound volume
button B2 and B3 press together : test soound volume
Stick together button 2 cut part 1 and 2 (stl) around button 1 (stl) to push button on top
draw grid into a circle (diameter 120mm) inside laminating film before pass in laminator.
stick "ecran" on the "boitier" first then stick grid film on "boitier"
stick "bord" above to finish
MP3 : https://www.myinstants.com/fr/search/?name=dragon-ball
copy MP3 to SD
| boitier1.stl | 660.4KB | |
| bord.stl | 225.1KB | |
| bouton2_Cut_1.stl | 256.4KB | |
| bouton2_Cut_2.stl | 250.7KB | |
| bouton_1.stl | 591.5KB | |
| couvercle.stl | 2.6MB | |
| ecran2.stl | 607.7KB | |
| reveil.ino | 5.0KB | |
| reveil.zip | 731.5KB |
![[Home Assistant] Alarm Box With Push Button + Buzzer + Door Sensor ESP8266 (updated + Configuration) 3D Printer Model](https://cdn.3axis.co/assets/aa/83/d9/58/aa83d958-a9e4-43c2-83e3-4f2b5a4497f3/images/35f903ac-2a40-4b72-9004-62506046f3f8_thumb.jpg)
