Dragon pillar candle mold.
Do not confuse the sequence when connecting parts. To do this, there are cutouts of different diameters at the bottom of the mold at the junctions of the molds.
Be sure to coat the mold with a release agent such as Vaseline.
The lower form clamp must be printed in vase mode (spiral mode) using the line width settings - 0.6 mm
I recommend filling while the mold is in the container in case of leakage. It is not necessary to tighten the shape with elastic bands.
If you pour wax into the mold along with the upper fixative (halfway), then at the bottom of the candle there will be a small base and the candle will be more stable.
The clothespin in the photo that I use is available at the link https://www.thingiverse.com/thing:6265926
I am creating a collection of molds for candles or soap. I will replenish it regularly. The collection is available at https://www.thingiverse.com/ashak1el/collections/40569188/things
| DownVase0.6.stl | 172.6KB | |
| Mold_1.stl | 7.6MB | |
| Mold_2.stl | 7.6MB | |
| Mold_3.stl | 8.6MB | |
| Up.stl | 311.9KB |
