I really liked the design of this Dracula's tower but I was not interested in the puzzle so, I have made this remix to be able to print the full tower in one piece.
Once the tower was "assemble", I removed most of the windows "glass" on the tower so a light source could shine through it.
After some testing, I have designed some "windows glass" panel, printed in transparent red PLA, and glued them inside the tower to cover the windows. With a red LED, the effect is look pretty nice.
The tower was looking great but a bit naked, so I looked on Thingiverse for a thing that could be use as cool base for it. What I chose was the lower part of a crystal lamp that I think work really well with the tower.
No support is required to print the tower.
To print a full set of windows glass, you will need to print one "Front door windows", seven "Bottom windows glass" and eight "Middle windows glass"
The tower was remix using a mix of Tinkercad, Onshape and Blender, the base of the crystal lamp was resized and slightly remix using Blender and no modification was made to the coin cell holder but I have included it for convenience.
The tower and the base were painted with acrylic paints.
The light used is a 5mm LED light bought in pack on Amazon and and the battery used is a CR2032 type.
Many thanks to all the creators, 3d-printy, ChrisTheViolaNerd and enauman, for posting your things and making this project possible!
| Base.stl | 417.2KB | |
| Base_cover.stl | 21.7KB | |
| Bottom_windows_glass.stl | 684.0B | |
| coin_cell_bat_single.stl | 36.3KB | |
| Front_door_windows_glass.stl | 684.0B | |
| Middle_windows_glass.stl | 4.8KB | |
| Tower.stl | 1.9MB |
