Doweling Jig 3D Printer Model
The file 'Doweling Jig 3D Printer Model' is (stl) file type, size is 12.1KB.
The file 'Doweling Jig 3D Printer Model' is (stl) file type, size is 12.1KB.
This is a 1/4" doweling jig that I created to help me through a project build. It was designed to work on 3/4" plywood or MDF, but I'm sure you can easily change that. I looked into commercially made jigs but they were all too expensive. So I decided to print my own!
You will need the following from the big box store, or off the interwebs (your choice):
2 - #6 x 1" machine screws
2 - #6 hex nuts
1 - 3/8" OD x 1/4" ID x 1/2" long metal spacer/bushing (steel or bronze should work)
I printed mine with the sides that would be facing the inside of the jig on the bed as to have them as flat as possible. The spacer should be a nice, tight press fit, but if it's loose, super glue should help do the trick. Once assembled, use a your 1/4" drill bit to finish drilling the hole in the dill plate. Then use a knife or the like to clean up the tear out. Done.
Hope you guys find this useful. It worked great for me and saved me about $60! Enjoy!
| Alignment_Plate.stl | 12.2KB | |
| Drill_Plate.stl | 29.6KB |
