Dove-tailed Press Fit LM8UU X-carriage 3D Printer Model
The file 'Dove-tailed Press Fit LM8UU X-carriage 3D Printer Model' is (heeks,stl,stp) file type, size is 1.1MB.
The file 'Dove-tailed Press Fit LM8UU X-carriage 3D Printer Model' is (heeks,stl,stp) file type, size is 1.1MB.
X-axis carriage with unbreakable LM8UU holders dove-tailed into the carriage - no screws required :)
Suits a Mendel Prusa, Mendel Max, Mendel Pro or any printer with 50mm spaced x-axis.
Also features fore and aft fan holders for my VGA fan holder http://www.thingiverse.com/thing:29158, wire loom anchor points at the rear and integrated one-sided belt clamp for T5 or XL belts.
Check back for the quick fit extruder mounts I am working on next.
I have also included the bearing holder clearance file I used to make the carriage if anyone else wants to have a go at this type of assembly, it automatically creates a gap of 0.25mm to allow the two parts to slide together.
30 September - Updated version XC3.6 with added material to prevent warping. Also has additional mounting points for my quick fit extruder hardware.
Quick fit latch here: http://www.thingiverse.com/thing:31528
| BC4.1_clearance.heeks | 242.9KB | |
| BC4.1_clearance.stl | 37.3KB | |
| GT2-3_clamp.heeks | 737.3KB | |
| GT2-3_clamp.stl | 92.1KB | |
| LM8UU_BC4.1.heeks | 228.3KB | |
| LM8UU_BC4.1.stl | 36.4KB | |
| LM8UU_BC4.1.stp | 218.0KB | |
| XC3.4_clamps.heeks | 189.1KB | |
| XC3.4_clamps.stl | 67.3KB | |
| XC3.4_clamps.stp | 178.7KB | |
| XC3.6.heeks | 2.2MB | |
| XC3.6.stl | 369.8KB | |
| XC3.6.stp | 2.1MB |
![Y-axis Linear Bearing [624zz] 3D Printer Model](https://cdn.3axis.co/assets/cd/d0/ee/4a/cdd0ee4a-b50d-4de1-9f6c-a974d3522136/images/b42d89b3-ef6a-4bba-b236-7f5a20f5d98d_thumb.jpg)
