This is a customizable dispenser for Dove bar soap in a box. The included design is for 6 bar storage which is the largest that will print in an Ender 3. Boxes are loaded from the top and pulled out from the bottom with an indicator windows showing how many boxes are stored.
You can actually store 7 boxes if you don't mind the last one sticking out of the dispenser but it will still be securely held in place.
The tolerance is a buffer around the box for both X and Y because there is a slight variation in the size of the boxes I measured and I also didn't want boxes to be stuck in the dispenser. You could probably half the tolerance and still be fine.
The uploaded .stl was created with the following parameters:
soap_width = 57.64; // 131 (lines) 0.44 (line width)
soap_length = 93.74; // 213 (lines) 0.44 (line width)
soap_height = 37; // 185 (lines) 0.2 (line width)
number_of_soaps = 6;
wall_thickness = 2.64; // 6 (lines) 0.44 (line width)
// Distance around soap box. Increase if too tight. Decrease if too loose.
tolerance = 2.1;
If you want to store soap that comes in a thin wrapper instead of a box, try my other thing:
https://www.thingiverse.com/thing:4058313
| Dove_Soap_Box_Storage.scad | 2.7KB | |
| Dove_Soap_Box_Storage_-_6.stl | 45.2KB |
