Dosing Cup-Attachment Eureka Mignon Single Dose 3D Printer Model
The file 'Dosing Cup-Attachment Eureka Mignon Single Dose 3D Printer Model' is (stl) file type, size is 54.0KB.
The file 'Dosing Cup-Attachment Eureka Mignon Single Dose 3D Printer Model' is (stl) file type, size is 54.0KB.
When the ground coffee was blown out, the finest coffee particles were distributed around the grinder. As a result, a fine film of coffee dust has formed on the work surface.
To avoid this, I designed this attachment for the dosing cup supplied with the Eureka Mignon Single Dose. It is simply placed on the dosing cup and stays in place without being too tight. The cup is placed with the attachment under the coffee ejector of the grinder. It should be noted that the cup is first placed on the base at an angle, front first, and then tilted backwards until the entire base is resting on the base.
The top can be quickly removed again before transferring to the portafilter.
The chamfer inside the attachment ensures that the ground coffee does not collect on the upper edge of the dosing cup. The chamfer at the bottom is only incorporated for easier handling.
If there is a need for customization, I will be happy to provide the Fusion360 file on request.
| Kaffeemessbecher_Aufsatz_2.0.stl | 132.0KB |
