Dose Control Pro – Single Dose Hopper 3D Printer Model
The file 'Dose Control Pro – Single Dose Hopper 3D Printer Model' is (stl) file type, size is 558.4KB.
The file 'Dose Control Pro – Single Dose Hopper 3D Printer Model' is (stl) file type, size is 558.4KB.
This is a different base for the Sage Dose Control Pro that can be used with the excellect feeder of DogsBollocks. This way you are closer to the burrs and will spill loss coffee around the burrs, as well as have the possibility to add bellows for a even better grind result.
The locking mechanism on the Dose Control Pro works slightly different from the Barista Express and is also a tad wider. To lock you just push the base in and turn it slightly to lock it in place. Before or after this step you can put in the feeder and either press fit or glue it to the base, or just put it in and leave it there.
You don't need to print any pins as the Dose Control Pro doesn't use the pins as a locking mechanism.
Edit: I added a one part printable STL, that also includes the part from DogsBollocks. With supports and everything this can easily be printed in one go.
| Dose_Control_Pro_Adapter.stl | 276.6KB | |
| Dose_Control_Pro_Single_Dose_-_One_Piece.stl | 1.1MB |
