THIS IS PROBABLY THE MOST EFFECTIVE CHILDPROOF LOCK .
Modified commercial child lock. Elegant non intrusive HARD TO OPEN design.
There are different versions of upper cap:
1) rounded -you will need support to print it
2) flat- no support needed
I also attached 2 versions of limiter:
1) Ready to assemble
2) Hole of 4.5 mm should be drilled (in case printed walls are weak - cheaper, moisty filament)
To fix it you will need some glue, silicone or double tape.
| base-stand.stl | 48.2KB | |
| frame.stl | 84.6KB | |
| limiter-drill.stl | 19.2KB | |
| limiter-ready.stl | 19.6KB | |
| upper-cap-flat.stl | 141.3KB | |
| upper-cap-round.stl | 1.1MB |
