A small remake of https://www.thingiverse.com/thing:4231231 I added a small tip at the end in order to be able to push button such as elevators or digicode.
I also reduced the height to 5.7mm and reshaped the top so it needs less material. Also removed 90% of the chanfer, kept a small part to detach the parts from the stack.
Update: I added a case to protect your pocket from potential contamination from the tool.
Stack
I'm printing this for my company to give to all the employees, therefore I also put a 10x stack. It works very well and is easy to detach if you print at 0.1, 0.15 or 0.3mm layer height (dividers of 0.3mm which is the interdistance).
If you want to make differents stacks than the one I provided, on Cura you can stack anything if you untick the option to "automatically snap to the ground". Then just put 0.3mm between the 2 objects so it creates a weak layer to detach the Z-stack at end of the print. With a spool of 2kg I can print 240 of these per run.
Actually I realized that this person did the same before me https://www.thingiverse.com/thing:4269665
with a Holster in addition.
| crochet_tit_hull_v2.stl | 63.2KB | |
| crochet_tit_v2.stl | 133.9KB | |
| crochet_tit_v2_stack10x.stl | 1.3MB |
