You are ironing, you hang that perfect item on a hangar on the door frame, it twists, it falls off. Yep, been there.
This thing is a multi-hangar for coat hangars that can be mounted to the top of an open door frame and can accommodate 6+ coat hangars. It is very easily removed and moved as required. It is made from PETG and printed with 60% off-set Hex fill on a zero infill angle, so all surfaces are fully bound and it's bomb proof.
There are three grab claws on the top that exploit the slight gap between the door frame proper and the facing boards. The centre of gravity is positioned so that the more you load it the more the hangar is pulled into the frame, tensioning the claws. It will fit any frame with up to 70mm facing flats and a moulding depth of up to 22mm.
You make and use this multi-hangar at your own liability with regard safety in use and any physical impact on the door frame(s) it has been mounted upon.
Enjoy.
| DoorIroningHookV1.stl | 2.5MB |
