Door Frame Insert For Axolote Hex Using Rbross Doors (Remix) 3D Printer Model
The file 'Door Frame Insert For Axolote Hex Using Rbross Doors (Remix) 3D Printer Model' is (stl) file type, size is 4.2MB.
The file 'Door Frame Insert For Axolote Hex Using Rbross Doors (Remix) 3D Printer Model' is (stl) file type, size is 4.2MB.
This is a magnetic door frame insert for use with the magnetic Axolote Hex tile and wall system.
I had a some rbross gloomhaven doors printed and painted and figured out if I cut up the door frame and added some magnet holes they work great with the Axolote Hex wall system.
Thanks again rbross for these great doors!
Version 1 is a little wider than 33mm (C, Flat to Flat) and the magnet holes might need to be drilled a little larger.
Version 2 DELETED
Version 3 is cut away and requires support but is 33mm wide at the base, the magnets should fit nicely but will require a little glue.
Related Links:
Magnetic Base Systems for Axolote Hex Tiles
Magnet Insertion Tools for Bases
Drilling Guide and Magnet Insertion Tools for Walls
| Robagon_flat-door-a-bottom_RBRossRemix_V1.stl | 5.9MB | |
| Robagon_flat-door-a-bottom_RBRossRemix_V3.stl | 2.4MB |
