Not much more to say, it speaks for it's self:
Retro floppy disc with doom logo to be used as a keyring or similar, current size is a large key ring so scale down for something smaller.
I used the floowing settings in CURA, please not i have issues with adhestsion to the plate so have fan cooling OFF, slower speeds overall, Brim ON :
Quality
Layer Height (mm): 0.1
Shell Thickness: 0.8
Enable retraction: Yes
Fill
Bottom/top tickness: 0.6
Fill density (%): 20
Perimieter before infill: Yes
Speed & Temp.
Print speed: 50
Print temp: 190
Bed Temp: 90
Support
Support type: None
Platform adhesion: Brim (10)
Fillament
Dia: 1.75
Flor (%): 100
Machine
Nozzle size: 0.4
Retraction
Speed: 50
Distance: 5
Quality
Initial layer thickness: 0.3
Initial layer line width (%): 100
Cuto off obj.: 0
Dual extruusion overlap: 0.15
Speed
Travel: 150
Bottom layer speed: 20
Infill spedd: 80
Top/bottom speed: 15
outer sheel speed: 30
Inner shell speed: 60
Cool
Min. layer time: 5
Enable fan cooling: No
| Floppy_Disk_DOOM.stl | 70.5KB |
