Doll House Baby Bed 3D Printer Model
The file 'Doll House Baby Bed 3D Printer Model' is (stl) file type, size is 381.1KB.
The file 'Doll House Baby Bed 3D Printer Model' is (stl) file type, size is 381.1KB.
A baby bed with drawers and a grid on one side that can be opened. The back side grid can be glued fixed if needed.
Supports have been designed into the STL file (under the bed bottom) and can be removed easily by hand, but be careful not to break off the legs.
There is also a no-supports version included if you want to generate your own supports. Your printer needs to have a parts cooler fan so it can bridge about 3 centimeters above the drawers, it wasn't an issue for my prusa clone with a part fan.
Make sure to print 2 pieces for the drawers.
Size is compatible with Sylvanian Family dolls.
Printing with 0.15mm takes long, about 3-4 hours (or less with a better printer), but it gives the best results. Infill should be 20-30%.
I printed it with white PLA and painted the model for a better look.
Check out my other items in Dollhouse Furniture Collection
| babybed_backgrid.stl | 94.7KB | |
| babybed_drawer.stl | 2.2KB | |
| babybed_frontgrid.stl | 76.4KB | |
| babybed_main_nosupport.stl | 533.5KB | |
| babybed_main_withsupports.stl | 569.2KB |
