This is a simple mount/adaptor for my MFT table fence (20mm dog holes), using 19.9mm dogs from china. The dimension of the dog can be found here (design is based on the silver, which is 6mm height):
1x M8x60mm (fully threaded)
1x M8 washer
4x M5 nut for 2020 aluminium extrusion
4x M5 20mm bolt (Optional 4x M5 washers)
2020 or 2040 aluminum extrusion
Initial intention for this is to be used with a 2040 V slot extrusion, and I am still waiting for the delivery to test the VSlot design. But the Misumi profile seems to fit well.
Will update the SLT for the VSlot if needed after I have test fit.
Between, I am still working on a flagstop for this design.
Will add more pictures later.
Cheers!
| Dogs_China_Fence_Adaptor-_2040_V-Slot_v2.STL | 159.0KB | |
| Dogs_China_Fence_Adaptor_-_2040_Misumi_Slot_v2.STL | 169.5KB |
